Electric lifting computer desk
contact us
phone：020－36637691
fax：020－36602164
Cell phone：13710366480（WeChat same number）
mailbox：[email protected]
Q Q：343055364
Address: No. 1, Gushu Avenue, Huangshatang Village, Chini Town, Huadu District, Guangzhou City, Guangdong Province
Solid wood double lift computer desk (including ultra-thin lifter with screen)
Size: (L1600*W600*H750) (Custom size can be customized according to customer requirements)
Countertop: The surface material is made of imported precious walnut veneer with a thickness of more than 0.6mm, which is insect-proof and anti-corrosion treatment, with good abrasion resistance, clear and natural texture, and consistent color. The base material adopts E1 medium density board (also called MDF), and the formaldehyde emission is lower than 9.0MG/100G, and the nail holding force and electrostatic strength on the surface must meet or exceed national standards. After moisture-proof, anti-corrosion, and insect-proof treatment, it has good strength, good rigidity and no deformation.
Table body: high-quality E1 environmentally friendly medium density board; paint: environmentally friendly paint with a hardness of H level; hardware: high-quality hardware accessories.
Structure: Each table is equipped with an electric remote control LCD lifter (the LCD monitor automatically lifts the bottom of the table when the computer is at that time and the monitor is automatically powered on. When the monitor is not used, the monitor is automatically hidden under the table), and each position has a computer host position , There is an access door in front of the computer desk to facilitate line maintenance.
Product Features:
1. During the ascent of the LCD screen, the mounting panel automatically opens, the LCD screen stands upright out of the desktop and automatically turns on the power, and automatically tilts to a certain angle.
2. The LCD screen is automatically adjusted to an upright state when it is lowered, and the power supply is automatically turned off.
3. The current of the LCD screen is automatically cut off and begins to drop, and the LCD screen is completely down and the decorative board automatically closes.
Lift parameters:
1. The display shell: the whole aluminum alloy CNG is used for one-time mold forming (surface treatment is sandblasted and anodized), ultra-thin arc design/lift panel: aluminum alloy with a thickness of 5MM is used for one-time mold forming
2. Transmission mechanism and whole machine structure:
1. Adopting the left and right double track and the middle chain design, the structure is more stable, there is no oil pollution, and the noise is less than 20 decibels.
2. The display shell is seamlessly connected with the ultra-thin round-shaft lifter, no exposed connecting wires, no connecting backplanes, and no exposed screws, ensuring the overall beauty of the lifter.
3. In addition to the normal control of the machine’s ascent, descent, forward and backward by the panel control buttons, you can also press the function switch button to switch to adjust the various parameters of the display, such as: brightness, color, etc.
4. The panel of the LCD lifting machine is preset with a USB port and a switch button for the electric host, and the USB port is connected to the USB port on the back of the device.
5. Support high-definition HDMI, VGA simultaneous input, panel buttons with HDMI and VGA switching function.
6. The display adopts a well-known domestic brand-BOE, with A standard screen. No color spots, no bright spots. The display is safe and reliable. The display screen adopts glass dust-proof and fingerprint-proof
3. The basic parameters of the product:
Motor power: 50W, screen ratio: 16:9/backlight/contrast/brightness: LED/800: 1/220/resolution: ≥1920*1080dpi/basic interface: VGA*1, HDMI*1, COM*2, USB *2, switch*1 / frequency response: 50Hz-17000Hz / sensitivity: -45±2dB @ 1KHz / power supply: AC220V 50/60HZ / installation method: desktop hole embedded / working temperature: -5 ~ 45 ℃ / work Humidity: 10%～95%
